back

Single-Acting Mechanical Seals

Dry-Running and Lubricated Mechanical Seal for Low Pressure Applications

Single-acting mechanical seals are designed with two seal rings with one interface and without any seal liquid chamber. This type of mechanical seal has therefore to be operated either under dry conditions or must be lubricated and cooled by the liquid product.

Any concerns?

Our specialists will be pleased to advise you.
Find contact

Product Details

The key design feature of single-acting mechanical seals is that they have only two seal rings. This means they have only one interface and no seal liquid chamber. Therefore this type of mechanical seal has to be operated either under dry conditions or it must be lubricated and cooled by the liquid product.

A key characteristic of single-acting mechanical seals is that they can leak into the surroundings of the vessel. This means the vessel is not technically tight, in contrast to double and triple-acting mechanical seals. Therefore, this seal design is suitable for sealing non critical substances and for low pressure applications.

Function and application:

  • Single acting, dry-running mechanical seal for low pressure applications
  • Ready-to-install cartridge unit
  • Deliverable with short heat trap at extremely high temperatures
  • Deliverable with Collector tray prevents abrasion material from contaminating the vessel space

Advantages:

  • Leak tightness: minimal leakage from the vessel side
  • Suitable for sealing non-critical substances
  • Plug + seal: no adjustment of the spring pre-tension after installation
  • Easy to monitor and install
  • Dry operation eliminates the need for additional installation or supply of seal liquid
  • Redundant monitoring by temperature sensor with transmitter
  • Visual wear indicator 

Working limits:

  • Operating pressure: vacuum ... 4 bar (abs.)
  • Vessel temperature: -10...+230°C
  • Shaft size: 40...220 mm

The EKATO ESD 32 is most suitable for:

  • Speciality chemicals
  • Formulated consumer products
  • Biofuels and bio refineries
  • Storage tanks

Function and application:

  • Single-acting product lubricated mechanical seal for sealing abrasive suspensions
  • Mechanical seal ESD142 is used as a flooded seal - horizontal or vertical installation 

Advantages:

  • No addition seal liquid supply systems required
  • Extended life time, with abrasive products 

Working limits:

  • Operating pressure:vacuum ... 3 bar (abs.)
  • Vessel temperature: -20...+100°C
  • Shaft size: 20...80 mm
  • Sliding speed: 0...5 m/s

The EKATO ESD 142 is most suitable for:

  • Biofuels und bio refineries
  • Storage tanks

Function and application:

  • Single-acting product lubricated mechanical seal
  • Sealing of abrasive suspensions
  • Used in flooded side entry installations
  • Mechanical seal most commonly used in FGD agitators worldwide

Advantages:

  • Lubricated and cooled by the product - no additional hydraulic installations required
  • Special plastics provide greater protection against caking and corrosion
  • Shut off device for replacement of mechanical seals even during operation without emptying the vessel

Working limits:

  • Operating pressure: vacuum ... 7 bar (abs.)
  • Vessel temperature: -20...+80°C
  • Shaft size: 40...120 mm
  • Sliding speed: 0...5 m/s

The EKATO ESD 42 is most suitable for:

Flue gas desulfurization

Downloads

contacts worldwide find your local contact

Search now